All Shapes and sizes as per customers drawing and specifications are made in thickness from 0.05 mm upwords. It is manufactured in variety of material like Spring steel, SS-304 , SS-316 , Aluminium , Brass etc .

The Washers range from 0.1 mm to 4.00 mm thickness and are made out of Copper, Phosper Bronze, Aluminum, Stainless Steel, Mild Steel, Fiber, Cork, Woolen Felt etc. Processing includes punching, Deburring, electroplating and annealing in case of metals only. Clamp for PTO, Rocker cover Bracket wiring harness for water pump, pipe vacuum modulator

We are regularly importing raw material Interface Solution, Wolverine Advance , Flexoide , Klinger

• S207cellulose paper 8092,2085G,jagolite
• Steel foam coating , NBR Metal Coating ,FPM Metal Coating ,FKM Coating , Flexoid from USA ,Germany , UK,England . We do keep moderate stock of Raw Material to cope-up requirements of our valued customers

Silicon beading on gasket is introduced to ensure total leak proof assembly of engine part.

A special process performed under specific atmospheric condition .

We are Manufacturer, Supplier, Exporter Of Sandwich Type Gaskets and our set up is situated in Aurangabad, Maharashtra, India.

These Gaskets are made by Sandwiching Gasket material with steel / copper / SS 304 / SS 316 layers from both sides. The Area of application of these Gaskets are for Cylinder Head. Inlet and Exhaust Manifolds in Automobile and Stationary Engines.

Cork Washer Kit is widely used for gasketing of bushings, radiators, and oil gauges. Such washers can be used in electrical switchgear also. These kits are available as per customers' drawings and requests.

Compression strength above 75 mpa ( 10000 Psi), High Tensile strength stress from 2.5 to 15 mpa resistance to temperature -30 to 125ºC and Hardness 65+-5 for our Grade GCS-II (RC-70-C) and 5.5 to 20 mpa resistance to temperature -40 to 125ºC and Harness 75+-5 for GCS-III (RC-80-C) and suitable for fluid contacts like mineral oil, Natural ester oil, silicone oil and SF6 gas

We are Manufacturer, Supplier, Exporter of Paper Joints and our setup is situated in Aurangabad, Maharashtra, India

We are Manufacturer, Supplier, Exporter of Copper Joints and our setup is situated in Aurangabad, Maharashtra, India

We are Manufacturer, Supplier, Exporter of Aluminium Joints and our setup is situated in Aurangabad, Maharashtra, India

We are Manufacturer, Supplier, Exporter of Brass Joints and our setup is situated in Aurangabad, Maharashtra, India

We are Manufacturer, Supplier, Exporter of Cylinder Head Gaskets and our setup is situated in Aurangabad, Maharashtra, India

We are Manufacturer, Supplier, Exporter of Automobile Gaskets and our setup is situated in Aurangabad, Maharashtra, India

We are Manufacturer, Supplier, Exporter of Rubber Gaskets and our setup is situated in Aurangabad, Maharashtra, India

Stamping is precision parts, Which we make in Copper ,SS ,Brass , CR ,Steel plate Fe 01 , EN grades from Thickness 0.5 mm and above.

This stamping is using in Electrical Application Like in Ignition Coil ,Armature Stack , Arch Chamber , Magneto , Electrical Lamination ,Submersible Pumps ,Terminals

The Washers range from 0.1 mm to 4.00 mm thickness and are made out of Copper , Phosper Bronze , Aluminum, Stainless Steel , Mild Steel , Fiber, Cork, Woolen Felt etc. Processing includes punching , Deburring, electroplating and annealing in case of metals only.

Clamp for PTO , Rocker cover Bracket wiring harness for water pump, pipe vacuum modulator .